I’ve run into a bit of an issue after a recent DIY fix and could use some advice.
Just swapped out the front spring on my 2012 1.3L Swift (only did one side, wasn’t up for tackling both at once!). But as I drove off from the garage, the ABS and ESP lights came on and haven’t turned off since. I did notice the ABS sensor cable was a bit tight during the swap, so I’m wondering if that might have triggered something. I checked all the obvious fuses, and they seem fine, but I don’t have a code reader to dive deeper.
Could a stretched or damaged ABS sensor cable cause both lights to stay on? Or is there another fuse or part I should be double-checking? ABS and ESP aren’t active while driving, so I’d love any input on what could be causing this or if there’s an easy fix!
Just swapped out the front spring on my 2012 1.3L Swift (only did one side, wasn’t up for tackling both at once!). But as I drove off from the garage, the ABS and ESP lights came on and haven’t turned off since. I did notice the ABS sensor cable was a bit tight during the swap, so I’m wondering if that might have triggered something. I checked all the obvious fuses, and they seem fine, but I don’t have a code reader to dive deeper.
Could a stretched or damaged ABS sensor cable cause both lights to stay on? Or is there another fuse or part I should be double-checking? ABS and ESP aren’t active while driving, so I’d love any input on what could be causing this or if there’s an easy fix!